SPECIFICATIONS
| Capacity | |
|---|---|
| Drilling [C.I.] | 45 |
| Drilling [M.S.] | 40 |
| Boring [M.S.] | 80 |
| Tapping [C.I.] | 20 |
| Tapping [M.S.] | 16 |
| Drilling Head | |
| Spindle Nose | M.T.-4 |
| Spindle Nose Outside Diameter | 60 |
| Ram Diameter | 80 |
| Travel of Spindle | 250 |
| Number of Spindle | 12 |
| Speed Min./Mix | 55-1500 |
| Number of Spindle | 12 |
| Speed Min./Mix | 55 - 1500 |
| Number of Power Feeds | 3 |
| Range of Power Feeds | 0.10 + 0.3 |
| Power | |
| Drilling Head | 2 HP |
| Two Speed Motor | 1440 + 2800 |
| Lighting of Arm | 1 HP 1440 |
| Working Range | |
| Column Diameter | 220 |
| Dist. From Spindle to base min./mix | 400 x 1100 |
| Dist. From Column to centre min./mix | 250 x 1080 |
| Horizontal Movement of Drilling Wheel | 800 |
| Drilling Radius | 1110 |
| Traverse of Arm | 600 |
| Base Plate | |
| Height of Base Plate | 180 |
| Working Surface | 800 x 1150 |
| Number of T Sloth Length | 3 |
| Width of Cast Side | 18 mm |
| Oerall Dimensions [ L x W x H ] | 1640 x 810 x 2160 |
| Weight | |
| Approximate | 1600 kg. |